Mini DC UPS ECO 418 Pro Series Backup Battery

Description

Description Mini DC UPS ECO 418 Pro Series Backup Battery Wide range of input voltage The Mini DC UPS ECO 418 Pro Series Backup Battery can offer normal and stable service voltage under its input voltage range. When the input voltage is out of its range the machine will switch to battery mode automatically to keep the output power in order to protect the equipment, such as computers, ensure they will not be damaged by the over high or over low voltage, users can continue the operation of equipment for a while or save the data on computers while the power network is abnormal. Wide range of AVR(Automatic voltage regulation) In the product’s input voltage range and under 3 steps of intelligent AVR function, it can provide a stable output voltage. Automatic self-detection when UPS on(LED). Before the UPS is on, red, yellow, blue LED will light up two times by cycle turns, after self-detection, the UPS switch to AC mode/battery mode or working mode. Silence function In the “battery mode”, shortly press the switch to turn off the buzzer. But the battery is about to run out or the load is too heavy, the buzzer sound cannot be muted. Overload protection In the battery mode, output voltage turn down correspondingly when it is overloaded, after the capacity of the load is lower than the rated power then the output voltage will revert to the rated value, it ensures the UPS will not shut down by abrupt overload which is caused by surging current during the computer is working and other equipment is added. Short circuit protection When the misoperation caused the load short circuit or computer failure (such as power tube breakdown of the switch) cause a short circuit, the UPS will shut down automatically for protection. The low current switch This UPS adopts a low current switch to extend the service life which is longer than a conventional battery and a high current switch in AC current path. Automatic charging There are two charging modes, charging time is faster than ordinary charging mode, higher efficiency, and greatly prolongs the service life of the battery. With a bypass output Independent bypass output socket for external printers or scanners of computer peripherals, with surge protection of the load. Specifications: Model ECO 418-2SP Input voltage 100-240Vac/50Hz ~60Hz Output Voltage 18W Output Voltage (selectable) USB interface DC interface POE interface 5Vdc 9Vdc 12Vdc 15Vdc/24Vdc Output Polarity Standard +4, 5pins, -7, 8pins Output power & current (in common) 2.0A/10W 1.0A/9W 1.0A/12W (0.8A/15V)0.5A/)12W or (24V) QTY & Capacity of battery 2200mAh * 4 Lithium battery Charging Period Typical: 2~3 Hours Physical Unit Dimension (mm) 160 x 105 x 28mm Net Weight (kg) 0.4 Environment of performance Temperature 0~40 degrees, Humidity 20%~90% Noise Level Less than 40dB